Patent leather shoes, with their distinctive gleam, make a striking and fun addition to any wardrobe. Modern patent leather shoes get their shine from a thin coating of plastic over the leather. Unfortunately, this plastic finish makes patent leather shoes inflexible and difficult to stretch. You can stretch your too-tight patent leathers a little bit with a shoe stretching kit or a little gentle heat from a hair dryer. Minimize the need for breaking in by buying shoes that fit well and taking a few basic measures to protect your feet.
Method 1 Using a Shoe Stretcher
1Stretch problem spots with a ball-and-ring stretcher. A ball-and-ring stretcher, which looks a bit like a giant pair of pliers, is designed to give a targeted stretch on one particular part of the shoe. This may be a good solution if your shoe pinches uncomfortably in certain places (e.g., over a bunion). Insert the ball part of the stretcher into the shoe at the point where you want to stretch it out, and squeeze the stretcher shut. Then tighten the clamp on the handles to hold it in place, and leave overnight.
- You may wish to slide a plastic sandwich bag over the outside of your shoe to protect the finish.
- Since patent leather shoes are pretty inflexible, you may need to repeat this process several times to get enough stretch.
- You’ll notice a bump on your shoe after you take off the stretcher. As you wear the shoe, this bump will eventually disappear.
- Ball-and-ring stretchers can be pricey, with less expensive models starting at around $40 USD, and more expensive models running around $70 USD.
2Use a two-way stretcher for an overall bigger fit. Two-way shoe stretchers fit into your shoe like a foot, and can be expanded length- and width-wise for an all-around bigger fit. Insert the shoe stretcher into your shoe, and slowly turn the crank to expand the stretcher inside the shoe. Once you have opened up the stretcher to the desired length and width, leave it in the shoe for 24-48 hours.
- Take care not to stretch your shoe too much or too quickly, or you may damage the finish or even cause the top to separate from the sole.
- Gradually add more stretch by expanding the stretcher with one full turn of the crank once every 8 hours.
- Two-way shoe stretchers come in a variety of styles, and some can be fitted with “pressure relief pods” to target problem areas.
- Two-way stretchers are generally less expensive than ball-and-ring stretchers, with lower-end models starting around $10 USD and more expensive models costing around $50 USD.
- Patent leather shoes may need multiple stretching sessions to get the desired effect.
3Use a DIY shoe stretcher. If you’re worried that a shoe stretcher might be a bit too harsh on your delicate patent leathers, you can gently expand the inside of your shoe by pushing a rolled-up sock or some wadded up newspaper into the toe and leaving it overnight. For a more all-over stretch, try wrapping up a glass bottle in a soft cloth and pushing it into your shoe.
Leave it to the professionals if you’re worried about your shoes. If you’re not confident in your ability to stretch your shoes without damaging them, take them to a shoe repair professional. Someone who is experienced in handling delicate and expensive shoes may have a better idea of how much stretching your shoes can take, and what techniques will work best to get the desired result.
5Skip the shoe-stretching spray. There are a variety of shoe-stretching sprays and treatments available to condition leather and make it easier to stretch. However, the special plastic finish on patent leather shoes will make these treatments ineffective, and these sprays may even damage the finish on your shoes.
Method 2 Stretching with a Hair Dryer
1Put on a pair of thick socks. Use some heavy thermal socks, or layer on a few pairs of regular cotton crew socks. The thick socks will help force your shoe open a little wider as you stretch it.
2Put on your patent leather shoes. Once the socks are on, squeeze your feet into the shoes you wish to stretch. This may take a bit of effort, but the thick socks will help protect your feet from rubbing and pinching.
3Blow hot air onto your shoe with a hair dryer. With your shoes and socks on, gently pass hot air from a hair dryer over the tight parts of your shoe. Don’t do this for more than 20 seconds at a time, since too much heat can damage the leather and the finish. Let your shoes cool down for a bit, and then go over them again. Aim for a total heating time of 2-3 minutes.
4Move and stretch your feet as you heat your shoes. While you are applying the heat, flex your feet inside the shoes. Getting the leather moving will help soften it up and make it more pliable.
5Let your shoes cool off on your feet. Don’t yank off your shoes as soon as you’re done blasting them with hot air. Allowing the shoes to cool with your feet still in them will help them conform to the size and shape of your feet. Walking around while your shoes are cooling can also help loosen up the leather and mold it to your foot.
6Try your shoes on with regular socks. After you’ve blasted your shoes with heat a few times and allowed them to cool off, take off your shoes and strip off the extra thick socks. Try your shoes on again with the socks or stockings you would normally wear, and see how they fit. If they still feel a bit tight, repeat the heat treatment. You may need 2-3 treatments to see a difference.
Method 3 Protecting Your Feet
1Buy shoes that fit well. Minimize the need for stretching or breaking in by getting patent leather shoes that are already a good fit for you. Since patent leather is stiff and unforgiving, you’re not going to be able to change the fit very much – maybe a quarter of a shoe size, at most. Have yourself fitted for shoes in the store, and try on a few pairs before you buy.
2Gradually increase the amount of wear time. You may be tempted to immediately take your new shoes for a night out on the town, but this is a recipe for aching feet. Buy your patent leather shoes in advance of when you plan to wear them, and spend a few days wearing them for short periods at home or at work. Start by wearing them for 10 minutes at a time, and then increase your wear time by another 10 minutes. Keep doing this over several days until you are comfortable wearing (and walking around in) the shoes for a full hour.
- The total break-in time will depend on a lot of factors, including what kind of material the sole is made of and how well the shoes fit to begin with.
- Your shoes may take anywhere from a few days to a few weeks to feel comfortable. Shoes with leather soles take longer to break in than shoes with rubber soles.
- The first time you wear your shoes out, try to keep your wear time to no more than 2-3 hours.
3Wear your shoes with thick socks for a while. Thick socks can both stretch the shoes and protect your feet from pinching and blisters as your shoes adjust to your feet (and vice versa). Spend a couple of hours every day wearing your shoes around the house with thick socks. Eventually, the shoes should expand a little and feel more comfortable with regular socks or stockings on.
4Pad the problem areas. While you and your shoes are adjusting to each other, you can minimize your discomfort by putting protective coverings on sensitive spots, such as your heels and any corns, or bunions. Check your pharmacy or shoe store for products that fit your needs, such as:
- Blister cushions.
- Bunion pads.
- Adhesive bandages.
- Surgical tape.
5Hydrate your feet to reduce friction. A lot of shoe-related discomfort is caused by shoes rubbing on your feet. Minimize blisters and friction-related pain by rubbing a little lotion, petroleum jelly, or antiperspirant on your feet before slipping on your shoes. Focus on the spots that tend to get the most irritated.
6Give your feet a break. If your feet start to hurt or develop blisters, give them some time to heal before you wear the shoes again. Consider bringing a comfortable pair of shoes to change into if you have to wear your patent leather shoes for a long stretch of time during the break-in period.
- It’s also a good idea to keep adhesive bandages and blister cushions on you, in case you end up stuck without a change of shoes.
7Store your shoes on a shoe tree. Any time you’re not wearing your shoes, put them on a shoe tree. A shoe tree is a foot-shaped device, much like a shoe stretcher. The shoe tree will help maintain your shoe’s shape when it is not in use, which is very helpful during the break-in period.
- Shoe trees are variable in price and design, but tend to cost anywhere from $10 USD to $35 USD.
- Some shoe trees also function as shoe stretchers.
Ask a Question
Things You’ll Need
Thanks to all authors for creating a page that has been read 657 times.